How to Install Your Mineral Stream Products

Simple Steps for a Luxurious & Healthy Shower Experience

Installing Your Mineral Stream Showerhead

Remove Old Showerhead: Unscrew counter-clockwise (left). Use a wrench if needed.

Clean Shower Arm Threads: Remove old tape/debris.

Apply Plumber's Tape: Wrap 3-4 times clockwise around threads.

Attach New Showerhead: Screw clockwise onto taped arm. Hand-tighten firmly.

Check for Leaks: Turn on water. Tighten by hand if leaks occur; reapply tape if needed.

Mineral Stream Hard Water Filter Installation & Use

Your filter transforms water, making it softer and purer.

  1. Prep: Remove old showerhead. Clean and tape shower arm threads clockwise.
  2. Attach Filter: Tape filter inlet threads clockwise. Screw filter clockwise onto shower arm. Hand-tighten.
  3. Connect Showerhead/Hose: Attach your showerhead/hose to filter outlet. Hand-tighten.
  4. Test & Enjoy: Turn on water, check for leaks.
  5. How it Works: Water flows through the filter, reducing chlorine, hard minerals, and impurities for softer skin, hair, and a cleaner shower.

How to Install Your Mineral Stream Shower Filter

  1. Handheld Shower Head
     Unscrew the shower head from the hose. Attach the MineralStream filter between the hose and the shower head. Hand-tighten until secure.
  2. Kitchen/BathroomFaucet
     Remove the existing aerator from your faucet. Screw the MineralStream filter directly onto the faucet outlet. Hand-tighten until secure.
  3.  FixedWall-MountShowerHead
     Unscrew the shower head from the wall arm. Attach the MineralStream filter between
     the shower arm and the shower head. Hand-tighten until secure.
  4. Rainfall/OverheadShowerHead
     Unscrew the rainfall head from the ceiling or wall arm. Attach the MineralStream filter between the arm and the rainfall head. Hand-tighten until secure.

How to Install Your Mineral Stream Shower Replacement Filter

  1. Unscrew the Filter Housing
     Hold the shower filter firmly and twist the top cap counter-clockwise to open the housing.
  2. Remove& Replace the Cartridge
     Pull out the old filter cartridge. Insert the new replacement cartridge into the
     housing.
  3. Reassemble the Filter
     Place the top cap back on and twist clockwise until hand-tight. Your filter is ready to use.

How to Install Your Mineral Stream Kitchen Faucet Filter

  1. What's in the Box
    Your MineralStream Advanced Faucet Filter comes with the filter unit, mounting clamp, and a diverter switch for filtered/unfiltered water.
  2. Choose the Right Adaptor
     Select the correct adaptor for your faucet size from the 6 included: - A3 (15/16") — A4 (13/16") — A5 (M18.5) — A6 (M21.5) — B3 (55/64") — B4 (M18.5)  Remove your faucet's existing aerator and screw on the matching adaptor.
  3. Attach the Filter to Your Faucet
     Slide the filter unit onto the adaptor and secure the mounting clamp. Turn on the tap to check for leaks. Use the diverter switch to toggle between filtered and unfiltered water.
  4. Clean, Filtered Water Instantly
     Your faucet filter is ready to use. Filtered water runs clear and clean — replacing the need for bottled water. Replace the filter cartridge every 3 months for best results.